A
From Single Axis to complex 6 Axes Controllers.......

We have them all

A
   

Single Axis Stepper Motor Control Systems


CNC-Controller IT 142 C

  • Power output stages 70 V/8 A
    o  Bipolar control of stepping motors
    o  Full- to 1/8-step
    o  IGBT-power output stage with protective circuits
  • 8-bit interface card UI4.C-E/A
    o  32 KB programme memory
    o  Serial interface RS 232C
    o  Operating system 4.C for CNC and DNC programming
  • Opto-isolated signal inputs (+24 V)
  • 16 relay switching outputs (+24 V/0.3 A)
  • Stepping motor connection via circular plug-in connectors on the back
  • On the back, plug-in connector for external programme start, stop and processor reset
  • Remote connector to connect external safety-circuit control
  • Table housing W = 250 mm H = 186 mm D = 310 mm
  • 19-inch rack 4HE
  •  

     

    4-Axis Stepping Motor Controller CSD 405 - IMC

    CSD 405-IMC
    • Compact stepper motor controller for bipolar control of up to four 2-phase stepper motors.
    • CNC operation (stand-alone applications)
      DNC operation (PC-coupled operation)
    • Linear, circular and helix interpolation of all axes involved
    • Serial communication via RS 232 interface, 9,600 Bd, 19,200 Bd
    • 2 opto-isolated signal inputs
    • 2 opto-isolated transistor switching outputs
    • 2 switching outputs AC 230 V
    • Control in-/output for external safety-circuit control elements
      • Monitoring of limit switches
      • Signal inputs for programme start /- stop
      • Mode-of-operation switch (automatic/trial)
    • Signal input of two limit switches at each drive axis
    • Bipolar power output stages, 33 V/2 A, micro-step operation (1,600 steps/rev.)
    • Tabletop unit (W480xD415xH187mm)
    • CE-compliant according to EN 55011B, EN 50082-1, EN 50178 (VDE 0160)

     

     

    5-Axis Stepping Motor Controller

    CYBERSTEP-5

    Cyberstep-5 is five axis micro stepping stepper motor controller capable to control 5 bipolar stepper motor simultaneously.
    • 5 axis simultaneous bipolar stepper motor control
    • Accepts all kind of standard G codes & M codes
    • Linear, circular and helix interpolation of all axes involved
    • Communication via parallel port.
    • Tool height sensor included.
    • 1 switching output of AC 230 V for spindle/coolant on/off control.
    • Bipolar power output stages @ 48 V
    • Adjustable current up to 7A /phase.
    • Adjustable micro stepping up to 51200 steps/revolution.
    • Closed loop option available for encoders

     
     
    3, Meghalaya, Dahanukar Colony, 7th Lane, Pune - 411029, INDIA
    Tel. : 91 - 20 - 25454728, Fax : 91 - 20 - 25454728
     
    E-mail : sales@cyber-cnc.com
     
    Website Designed, Hosted and Maintained by Tecmark India